Y Type Strainer
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines
by means of a perforated or wire mesh straining element. They are used in pipelines to protect
pumps, meters, control valves, steam traps, regulators and other process equipment.
Y-Strainers are very cost effective straining solutions in many applications. Where the amount of
material to be removed from the flow is relatively small, resulting in long intervals between screen
cleanings, the strainer screen is manually cleaned by shutting down the line and removing the
strainer cap. For applications with heavier dirt loading, Y-Strainers can be fitted with a "blow-off"
connection that permits the screen to be cleaned without removing it from the strainer body.
Y-Strainers are used in a wide variety of liquid straining applications to protect downstream
process system components in many industries, including: chemical processing, petroleum, power
generation and marine. Water handling applications, where Y-Strainers are used to protect
equipment that could be damaged or clogged by unwanted sand, gravel or other debris, are very
common
While often used in many different types of liquid applications, a Y-Strainer is considered the
standard for steam applications and is almost universally used for these applications. Its compact,
cylindrical shape is very strong and can handle high pressures. It is, literally, a pressure vessel.
Y-Strainers which handle pressures up to 6000 psi are not uncommon. Of course, in these cases,
the design of the strainer is critical so that it can stand up to these high pressures without fear of
failure. When high pressure steam is being handled, another complicating factor arises,
temperature. With steam pressures of 1500 psi or higher, standard carbon steel is sometimes not
suitable because the steam temperature may be 1000° F or higher. In these cases, the Y-Strainer
body is generally made of chrome-moly steel.
Besides steam, Y-Strainers are often used in air and natural gas applications. Here again, high
pressures are not uncommon. However, unlike steam high air pressure does not automatically
mean high temperature and so, ordinary carbon steel bodies of sufficient wall thickness will
generally suffice.
Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in
either a horizontal or vertical position. Obviously, in both cases, the screening element must be on
the "down side" of the strainer body so that the entrapped material can properly collect in it.
Some manufactures reduce the size of the Y -Strainer body to save material and cut cost. Before
installing a Y-Strainer, be sure it is large enough to properly handle the flow. A low-priced
strainer may be an indication of an undersized unit.
Carbon steel Y-Strainers are used mainly in the oil and petrochemical industry. They have
excellent resistance to mechanical or thermal shock and these are important consideration in the
event of a fire. Most oil refineries will not permit iron piping components for this reason. Carbon
steel Y-Strainers are also used for higher pressure applications because of their great strength.
Stainless steel Y-Strainers are used where high corrosion resistance or where freedom from
contamination is required. They are popular in the chemical, food and pharmaceutical industries.
It cannot be stressed too highly that Y-Strainers for critical applications must be adequately
designed. This means sufficiently heavy wall thickness and blow-off connections. As an example,
in improperly trapped steam lines, condensate can collect in low points and become a slug of
water traveling at very high velocity down the line. Even the slight change in direction caused by
a Y-Strainer can produce a tremendous shock which can damage the strainer. Manufacturers who
thin down walls to save weight and cost are asking for trouble in these cases.
A Y-Strainer, if fitted with a blow-off connections, can be a self-cleaning strainer. A valve is
installed on the connection located on the strainer cap. The screen can thus be cleaned by simply
opening and then closing the valve without shutting off the flow or disassembling the strainer.
When the valve is opened the material trapped inside the screen drains out. The illustration above
show a Y-Strainer with a blow-off connection.
Another critical thing to check for in Y-Strainers is the point where the screen or straining
element seals to the body. This seat should be carefully machined so no particle can bypass it. The
same thing applies to the cleanout end. The screen should fit tightly. Beware of strainers with
un-machined seats. The improperly seated screen will permit bypass of the fluid allowing dirt or
debris downstream.
Y-Strainers are available with a wide variety of end connections including threaded, flanged and
welded. Flanges are designed to ANSI specifications.
Special flanges such as ring joints are often available as well. Y-Strainers can be constructed to
US Navy flange dimensions, which are different from commercial standards. For extremely high
pressure applications, Y-Strainers with socket or butt weld end connections are often specified.
When specifying or buying a Y-Strainer, price, which is often the prime consideration, should be
the least important consideration. A well made and properly designed Y-Strainer will last almost
indefinitely. Its first cost is, therefore, not important compared to other features when spread out
over a service life of many years.